4 Top Tips on Gas Powered Leaf Blower Maintenance

Gas powered leaf blowers are very helpful in cleaning your garden or yards. But for these machines to work properly, maintenance is necessary. 

With these tips, you can be sure your gas powered leaf blowers are always in their tip-top shape.

Why having a gas powered leaf blower is always a great choice

Using a gas leaf blower is always a better choice rather than using a rake and manually gathering dry leaves and debris. Why? Because it is easier, quicker, and more efficient. And most importantly, your back will thank you later.

Blowing leaves with a gas Powered Leaf Blower. Schröder USA

Gas-powered leaf blower maintenance

Before we talk about gas leaf blower maintenance, let’s first figure out its 4 most important parts:

  • Air Filter: This is the part that filters the air coming to the carburetor. If this gets damaged, particles and debris will get inside your carburetor causing it to get dirty. 
  • Carburetor: It mixes air with fuel to help produce gas. This air and fuel mixture will get into a cylinder where the machine compresses it, then ignites the air and fuel mixture with the spark plug.
  • Fuel Filter: Just like an air filter, the fuel filter makes sure no debris or particles get into your engine from your fuel tank.
  • Spark Plug: This is the one that ignites the air and fuel mixture. If it gets damaged and not properly maintained, your gas leaf blower will stop working or might not work properly.

In order to properly maintain a gas powered leaf blower, we need to look after these 4 important parts to minimize the amount of time you spend troubleshooting.

Fresh fuel recommended

Before oil change, check your fuel filter first. If it is clogged, replace it.

Remove ALL the old oil, dispose of the oil properly, then replace it with a new one. Make sure you put the correct mixture of oil. It is necessary to check your gas leaf blower manual for what type and combination of oil are needed by your equipment. 

Make sure your leaf blower’s tank has enough oil.

Check the air filter frequently

Your air filter captures a lot of dust, debris, and other particles. Hence, making it necessary to clean and replace your air filter, frequently. 

Take it out and start cleaning it. You can use a vacuum cleaner or a scrub to remove the dust, dirt, and debris left in your filter.

If you see any hole in your filter, replace it.

Air filter for Gas Powered Leaf Blower. Schröder USA

Check the spark plug

Remove your spark plug cable from the top of the spark plug. Use a spark plug wrench to remove your spark plug from the machine. Check the hole where your spark plug used to be. Make sure there is no dirt and dust accumulated in it.

Using a wire brush, clean the part where your engine is connected to your spark plug. 

After cleaning your spark plug, put it back into your gas leaf blower. Make sure not to put too much force into your wrench when you are putting it back.

The importance of regular gas powered leaf blower maintenance

Just like any other tools and equipment, your gas powered leaf blower needs to be properly maintained and cleaned. This will ensure your gas leaf blower will work properly every time you use it. It will also prevent any damage from happening to your leaf blower. And later, save you a lot of money. 

Regular maintenance routines will help make sure your leaf blower will last for a long time and is always ready anytime you need it.

Clean it regularly

First, check your gas powered leaf blower for any dirt and debris. Check your air filter regularly to keep your leaf blower running smoothly. This is helpful especially for those spaces your hand can’t reach.

Mix soap with warm water and clean then get a clean cloth. Put the cloth in your soap and warm water mixture and squeeze out excess water. Wipe your leaf blower after every use. Make sure not to get the motor wet.

Use a cloth and soap to clean a Gas Powered Leaf Blower. Schröder USA

Look for wear and tear

Just like any equipment, your gas powered leaf blower is subject to wear and tear. Check all the components and decide which one needs replacement or repair. 

Regularly inspect your gas leaf blower and all its parts. These parts get loose and wear out with every use.

Check the sound

When you turn on your gas leaf blower, do you hear an unfamiliar sound? To ensure your safety while operating a gas-powered leaf blower, carefully inspect and listen to any unusual sounds.

If your gas leaf blower is getting louder and louder, it is time for you to take a closer look at your leaf blower’s components. 

Store the machine properly

Store your gas powered leaf blower in a clean and spacious area. Put it on top of an elevated space or a stable and durable table. This way, your leaf blower will be safe in case of water spillage or flood. 

Store a Gas Powered Leaf Blower in a tool shed. Schröder USA

Leaf blowers can be easily damaged if stored in a very tight space. Make sure to store it in a room with a lock. This will help keep unauthorized people from getting into your gas powered leaf blower, especially children and pets.

If these suggestions don't get your leaf blower in tip-top shape, the best option is to take it to a service shop for professional repair.

However, by taking care of your equipment, you can lessen the likelihood that it will require professional service. A little upkeep now can ensure that you get a lot of use out of your gas powered leaf blower for years to come.

For additional information about backpack leaf blowers, please visit Schröder USA or contact us today for more on backpack leaf blowers!